|
07-04-2003, 11:17 AM | #61 |
AstinaGT Regular
Join Date: Nov 2002
Location: Sydney
Posts: 335
|
[quoteost_uid0="JynX"][color=#000000ost_uid0]Dont buy any AG piping, im going to get a role from the local hardy as its going to be too hard to get dans up and mal is also interested in some so Ill just get a roll and well organise a day to do some installing...[/colorost_uid0][/quoteost_uid0]
[color=#000000ost_uid0]yo jynx, if ur gona have a day around here, then im in too mate. so keep me some of that AG. thanx manuel[/colorost_uid0]
__________________
O-LYM-PIC O-LYM-PIC O-LYM-PIC "her name was veronica, she had an ass the size of south america" -wyclef |
07-04-2003, 08:21 PM | #62 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid9]Honda Driver Bear = Aleks........
We missed by > < that much..... Hrmmmmmmmm Next? But seriously? I am keen to do the CAI Weekend if a) I come back from holiday with money hahahahahahahahaha *chokes on laughter* b) some of you guys are willing to be around c) Jynx willing to hold some of that AG pipe Unfortunately this weekend looks REAL bad for me......... I don't wanna miss out, please fellas? Don't make the kitty beg? You've heard the saying: Dog's have Masters, Cat's have Slaves! or In Ancient Egypt, Cat's were worshipped as Gods, Cat's have never forgotten this! or plain ole please? :: [/colorost_uid9] |
07-04-2003, 08:31 PM | #63 |
The Architect
Join Date: Jul 1998
Location: Canberra, ACT
Car: AUSDM S6 RX7
Posts: 1,600
|
[color=#006666ost_uid0]ah completely different person!
Im talking southside... ah well I know Aleks too... I will come round.. I can assist you in grabbing some piping... autobahn sometimes has some really nice stuff at a resonable price[/colorost_uid0]
__________________
Tony Formally known as Lantis and Xedos Infinite Networks- Creative Web design and powerful online application solutions |
07-04-2003, 08:41 PM | #64 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid0]Awwww Shucks!
Thanks Tony!!!! Mind you I haven't seen Aleks in (are you ready for this) YONKS! hahahahahaha (the girl is going insane) Jynx is getting the AG pipe under control, so it is going to be a matter of getting the K&N kit, any other bits and bobs, and getting the timing act together! Any estimates as to how long the whole process will take? Does the front end [iost_uid0]have[/iost_uid0] to come off? Just trying to figure a way to get it done at the same time as everyone else if possible. Basically trying not to be a pain in the butt.... I know, it'd make a change for me! :: May works better for me, but like everyone else, I don't want to wait either........ Any suggestions? Any magic wands? [/colorost_uid0] |
07-04-2003, 09:33 PM | #65 |
Senior Member
|
[color=#000000ost_uid0]It is easier to run the piping with the front end off... but I guess it wouldnt "have" to come off....
Well how we get em all done at the same time.... you do your car... ill do my car The front bar is easy to get off so dont stress... CAI i estimate would take about an hour inc getting bar on and off. Depends if we need to enlargen the hole in the air box. I will head down to the hardy this week and see if I can pick the pipe up. Ill do my car first and get a procedure down pat so to speak so u others can simply follow suit. I wasnt planning on having this "day" untill the end of the month. I will move this post to a new topic so we can get some idea of interest.[/colorost_uid0]
__________________
JynX 1994 Turbo BA Astina 200whp @ 12psi "If you cant drive fast with 90hp..... 900hp wont help you" |
07-04-2003, 09:39 PM | #66 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid0]Er.... think I kinda beat ya off the mark off that one, have already started new topic in cruises.....
Prolly about the only time I will beat anyone off the mark around here though *grins cheekily* Sounds like a great idea though Jynx!!![/colorost_uid0] |
07-04-2003, 09:43 PM | #67 |
Senior Member
|
[color=#000000ost_uid0]god damn this always happen to me...
You can organise it then /me wipes his hands.... lol[/colorost_uid0]
__________________
JynX 1994 Turbo BA Astina 200whp @ 12psi "If you cant drive fast with 90hp..... 900hp wont help you" |
07-04-2003, 11:41 PM | #68 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid0]*kitty smacks forehead homer simpson style*
Duoh! Me in Canberra Ugg Nugg You in Sydney Ugg Nugg grubble grubble grubble *kitty is given the red card and sent back to the Litter Box*[/colorost_uid0] |
08-04-2003, 02:31 AM | #69 |
Senior Time-waster
Join Date: Sep 2002
Location: Airborne somewhere in Aus...
Car: 2005 SP23 Hatch
Posts: 1,779
|
[color=#810541ost_uid0][quoteost_uid0](the girl is going insane)
[/quoteost_uid0] /me wonders what kitty has been smokin out the back, catnip?? :O[/colorost_uid0]
__________________
Gimme a caffeine drip and I'll be right.... Confuscias say "man who go to sleep with itchy bottom, wake up with smelly finger" |
08-04-2003, 03:31 AM | #70 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[quoteost_uid0="MrShadow"][color=#000000ost_uid0][quoteost_uid0](the girl is going insane)
[/quoteost_uid0] /me wonders what kitty has been smokin out the back, catnip?? :O[/colorost_uid0][/quoteost_uid0] [color=#736AFFost_uid0]Whaddya mean [iost_uid0]going[/iost_uid0]? :: And you don't smoke catnip..... you roll around in it nekkid! *purr purr purr* [/colorost_uid0] |
08-04-2003, 03:44 AM | #71 |
Junior Member
|
[color=#728FCEost_uid0]I've just got another stupid CAI question... i'm probably getting heaps paranoid now... But what about water getting into the pipe... i know if water gets sucked up into the engine... well.. bye bye engine yes? also... are people who already have the duct going into the panel filter using some sort of mesh to stop leaves and moths and bugs and other assorted debris going up into the filter box?
oh and 1 more thing... if i just remove my resonator, and not do the ducting yet... it this going to cause any problems?[/colorost_uid0]
__________________
2Ltr Manual V6 1994 Astina Hardtop With Sunroof +Check My stina in the readers rides area+ |
08-04-2003, 04:46 AM | #72 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid0]Have no fear Brad, I already thought of the same questions....
Apparently it would take a lot of *ulp* Suck (yes I said that) to get water up that far, and as for debris, same thing, but then again, that is what the actual filter is for. You just clean it out every couple of months or so I have been told. I asked a similar question about the resonator, I actually asked if it was possible to gut the existing one as a temporary measure, but it seems that you can't know how it is set up until you crack it open. Being made of plastic, it is just moulded and stuck together. As for living without one altogether, from what I am seeing here, it seems that you would be better off with a specific intake pipe/hose/thingymajig and just do it right the first time. *whispers* How'd I do fella's?[/colorost_uid0] |
08-04-2003, 05:16 AM | #73 |
Stiff Member
|
[color=#000000ost_uid0]Yeah - Don't worry too much about water injestion if you're just running cold air ducting up into the factory air box. It'd take a lot of work to fill the airbox to the bring and actually end up with water in your motor.
On my last car the CAI was actually designed in such a way that the intake pod sat level with the bottom of the bumper, in a cool area between the gearbox and the front end. Cool air came in through the bumper area as well as from below. Ofcourse this meant that it was like having a drinking straw attached to the motor about 15cm above ground level. I never had any probs with water, except with the actual filter material getting damp and reducing performance. Ofcourse I didn't do the stupid thing and drive through deep standing water... Splashing was/is OK though. In some ways I miss that intake - thanks to the shaping of it it "bellowed" at WOT... quite a fearsome noise [/colorost_uid0]
__________________
Current: Stinky the imfamous Lynx |
10-04-2003, 04:18 AM | #74 |
AstinaGT Regular
Join Date: Jul 2002
Location: Dixons Creek VIC AU
Car: 1995 BA Astina
Posts: 370
|
[color=#3A6EA5ost_uid0]if you are getting really stressed a the idea of hydrolock (the technical term for f@#$ing your engine when it gets ful of water) you can add what's called a air bypass valve. This goes inline with the CAI tubing and will shut down the system if it starts sucking up water).
Unless you are going to rally in feet of water then probably a waste of $$$.[/colorost_uid0]
__________________
If you can keep your head while those around you are losing theirs, then perhaps you have misunderstood the situation |
10-04-2003, 04:24 AM | #75 |
Stiff Member
|
[color=#000000ost_uid0]All the Bypass vavles do is impede flow and let your engine suck water at a higher point
Worthless paying for one when commonsense is free... And from what I heard from people in the US they only work effectively 10% of the time....[/colorost_uid0]
__________________
Current: Stinky the imfamous Lynx |
10-04-2003, 04:35 AM | #76 |
AstinaGT Regular
Join Date: Jul 2002
Location: Dixons Creek VIC AU
Car: 1995 BA Astina
Posts: 370
|
[color=#3A6EA5ost_uid0]that'd be right. I've also heard that the valve bit can come out and jam you WOT - very sub optimal...[/colorost_uid0]
__________________
If you can keep your head while those around you are losing theirs, then perhaps you have misunderstood the situation |
10-04-2003, 04:42 AM | #77 |
Stiff Member
|
[color=#000000ost_uid0]the worst failure I heard of was one being fitted to an "Iceman" intake on a Neon, this means the bypass valve is mounted AFTER the pod filter.
Essentially what happned is the bypass guts 'dropped' out during a track session, and debris from the failure got sucked up the intake pipe straight into the guys brand new hi-po 2.4L motor (he was running the car with the 2.4L DOHC from a Stratus... basically a big bore version of the stocker)... Cost him USD1000+ to get it back on the road thanks to the head, bores and pistons all being damaged.... And don't forget if it's mounted after the filter it will let unfiltered air into the motor another bad thing....[/colorost_uid0]
__________________
Current: Stinky the imfamous Lynx |
10-04-2003, 11:04 PM | #78 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid9]In the Canberra CAI Day thread in the Cruise folder, I have mentioned a list of all parts required to do the CAI.
I only ask about it because Pr1mo has asked about bushes in regards to the Swaybar, which I know nothing about until tomorrow when I pick it up. I was wondering if there was a comprehensive list of all the knick knacks <--- spelling? that are required? If I am going to do this CAI Day, then I don't want to have to go to the Auto shop 16 times to pick up different clamps, tape or similar. Also, there was mention of different sized AG pipe by Jynx, and using an old airbox?? What the?? See? I am full of dumb questions, and I'm not even blonde!!! [/colorost_uid9] |
10-04-2003, 11:16 PM | #79 |
Administrator
Join Date: Mar 2002
Location: melb.vic.au
Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle
Posts: 16,525
|
[quoteost_uid0="KittyKatSmack"][color=#000000ost_uid0]See? *I am full of dumb questions, and I'm not even blonde!!![/colorost_uid0][/quoteost_uid0]
[color=#000000ost_uid0]but it's the dumb brunettes that dye their hair blonde that give blondes a bad name :laugh: :O /me runs away now[/colorost_uid0]
__________________
jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--|--SLOWTEGE--|--BEETLE--|--SUBSTITUTE--|--AZ-1 |
10-04-2003, 11:22 PM | #80 |
Banned
Join Date: Mar 2003
Location: Australia
Car: Mazda
Posts: 3,961
|
[color=#736AFFost_uid0]/me throws hair bleaching kit after rupewrecht![/colorost_uid0]
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BJII SP20 Engine Shudder On Start Up | sherrif | Performance & General Maintenance | 10 | 23-08-2006 12:50 PM |
Advice wanted | KittyKatSmack | General Automotive Talk | 37 | 27-07-2005 02:32 PM |
Where to start on an engine swap? | skippy | Forced Induction & Engine Conversions | 14 | 28-01-2005 11:14 PM |
Quality advice wanted. | Pernod | Audio Hi-fi | 21 | 19-10-2003 06:00 PM |
Best way to start with audio... | ***G*** | Audio Hi-fi | 8 | 17-09-2003 11:50 AM |