[ABOUT] Trader: Rupewrecht (+ Your Shipment Information!) - Page 50

Rafferty · 11-03-2013, 02:18 PM

Quote:

Originally Posted by Rupewrecht

I've still got some Supergrids in stock. No rears though - they don't sell ones that short.

Hey Rupe, how much for those delivered to 2049 NSW? Are they straight forward to install? No fiddling around? Do you get wiper blades with them?

Rupewrecht · 11-03-2013, 03:10 PM

Quote:

Originally Posted by Rafferty

Hey Rupe, how much for those delivered to 2049 NSW? Are they straight forward to install? No fiddling around? Do you get wiper blades with them?

$107 shipped, easy to install, and yep they come with blades.

Rafferty · 11-03-2013, 07:04 PM

Hi Rupe,
Is it hard to find generic wiper blade replacements for these? I read in the GB for these Wipers where TheMAN said they take 9mm ones. And that normally you can only get 6, 7, and 8mm ones generically. Do you really have to order them through Honda to get individual ones from different car models to make p a new set? I really want to get these, they look excellent but I don't want it to be a hassle later on when its time to replace blades. Have you had any feedback from al the guys that bought in the group buy early last year or is it too early and no ones replaced theirs yet?

Also, what about what Ed suggests at the end of wiper GB thread to maybe get a GB for the replacement blades available from Japan..?

Anyway, let me know and I'll decide wether to go ahead.

Thanks for your help, Raff

ben carney · 11-03-2013, 07:30 PM

Quote:

Originally Posted by Rafferty

Hi Rupe,
Is it hard to find generic wiper blade replacements for these? I read in the GB for these Wipers where TheMAN said they take 9mm ones. And that normally you can only get 6, 7, and 8mm ones generically. Do you really have to order them through Honda to get individual ones from different car models to make p a new set? I really want to get these, they look excellent but I don't want it to be a hassle later on when its time to replace blades. Have you had any feedback from al the guys that bought in the group buy early last year or is it too early and no ones replaced theirs yet?

Also, what about what Ed suggests at the end of wiper GB thread to maybe get a GB for the replacement blades available from Japan..?

Anyway, let me know and I'll decide wether to go ahead.

Thanks for your help, Raff

I'm fairly sure you can buy oem Japanese blades ones from supercheap, not sure what size specifically, but like 15.95

Rupewrecht · 11-03-2013, 07:43 PM

Quote:

Originally Posted by Rafferty

Hi Rupe,
Is it hard to find generic wiper blade replacements for these? I read in the GB for these Wipers where TheMAN said they take 9mm ones. And that normally you can only get 6, 7, and 8mm ones generically. Do you really have to order them through Honda to get individual ones from different car models to make p a new set? I really want to get these, they look excellent but I don't want it to be a hassle later on when its time to replace blades. Have you had any feedback from al the guys that bought in the group buy early last year or is it too early and no ones replaced theirs yet?

Also, what about what Ed suggests at the end of wiper GB thread to maybe get a GB for the replacement blades available from Japan..?

Anyway, let me know and I'll decide wether to go ahead.

Thanks for your help, Raff

No idea, i've never used a set. and haven't heard of anyone needing to replace theirs yet.

If they use Honda blades, then they'll be easy enough to source - it's not like aftermarket suppliers wouldn't be making them for Hondas.

Rafferty · 12-03-2013, 05:07 PM

Ok Rupe, hit me up for a set of those wipers buddy. For BJ 2001. Send me payment details via PM. Thanks

xeon8 · 08-04-2013, 07:27 PM

Rupey! When are my rims coming in?

Rupewrecht · 08-04-2013, 08:01 PM

Quote:

Originally Posted by xeon8

Rupey! When are my rims coming in?

Think i saw them today while unpacking the container

Still have to wait for quarantine, so next week at this stage.

Hammo · 08-04-2013, 08:33 PM

Quote:

Originally Posted by Rupewrecht

Think i saw them today while unpacking the container

Still have to wait for quarantine, so next week at this stage.

Ooooohhhh so my autoexe intake has landed then

Think it will get to me by the 17th?

Rupewrecht · 08-04-2013, 09:36 PM

Quote:

Originally Posted by Hammo

Ooooohhhh so my autoexe intake has landed then

Think it will get to me by the 17th?

Yes, and probably!

Noble323 · 08-04-2013, 09:40 PM

cool

hopefully my stuff is on this

ghetto3 · 08-04-2013, 09:48 PM

How long until i need to fix up the remaining balance for those 17x8"+35 babies?

Have a look at my latest album to see where all my spare cash is going! Well that and court proceedings, solicitors and the like. Vampires they are for sure..

Rupewrecht · 08-04-2013, 09:48 PM

Quote:

Originally Posted by Rupewrecht

Here. Still sorting through it at the moment!

Next one left last week, with stuff for:
- rodhog
- DanielJ
- BRAE
- DVS
- Hammo
- preeman80
- xeon8
- Noble323
- plus the usually assortment of wheels (TOMS, Work, Mooneyes, Mazdaspeed, Weds), NA/NB MX-5, FD RX-7 and some BJ parts.

Arrived, unpacked today, should be sorting through it this weekend.

Next one left today, with stuff for:
- ben carney
- deez
- ghetto3
- Mattsan
- HAIGHIE
- Hammo
- StanleyW
- and stuff for stock, including: Mazdaspeed Sport seats, some BJ 323 AutoExe parts as well as quite a few other bits for BJ, plus some Mazdaspeed + Work + Enkei wheels.

Rupewrecht · 08-04-2013, 09:50 PM

Quote:

Originally Posted by Noble323

cool

hopefully my stuff is on this

Yes

Quote:

Originally Posted by ghetto3

How long until i need to fix up the remaining balance for those 17x8"+35 babies?

About a week

ghetto3 · 08-04-2013, 09:56 PM

Another installment tomorrow then!!
Megasquirt will have to wait.

Rupewrecht · 08-04-2013, 09:59 PM

Quote:

Originally Posted by ghetto3

Another installment tomorrow then!!
Megasquirt will have to wait.

Ha all good, you can take a bit longer if you want.

Hammo · 08-04-2013, 10:07 PM

Quote:

Originally Posted by Rupewrecht

Arrived, unpacked today, should be sorting through it this weekend.

Next one left today, with stuff for:
- ben carney
- deez
- ghetto3
- Mattsan
- HAIGHIE
- Hammo
- StanleyW
- and stuff for stock, including: Mazdaspeed Sport seats, some BJ 323 AutoExe parts as well as quite a few other bits for BJ, plus some Mazdaspeed + Work + Enkei wheels.

Awww yeah got me some stopping power in there

HAIGHIE · 08-04-2013, 11:18 PM

Got me some face lift

DVS · 17-04-2013, 07:20 PM

what bj stuff do you have coming in next few containers?

Rupewrecht · 17-04-2013, 10:00 PM

Quote:

Originally Posted by DVS

what bj stuff do you have coming in next few containers?

BJ AutoExe CF Intake
BJ MintBue Rear Wing for Hatch
BJ Clean Bin
BJ Tombstone + window switches - OEM marble version
BJ Carbing Strut Brace Rear - Steel
BJ AutoExe Muffler for Sedan
BJ AutoExe Strut Brace 3pt Front
BJ Sport20 Foglights
BJ MSF Exhaust Manifold
BJ Sport20 Bodykit for Hatch
BJ Sport20 HID Black Headlight pair
BJ Carbing 2pt Strut Brace Front - Alloy
BJ Cusco Vacanza Coilovers

08-04-2013, 07:27 PM	#987
xeon8 Senior Member Join Date: Dec 2011 Location: Adelaide Car: 2000 Mazda BJI Protege Posts: 878	Rupey! When are my rims coming in? __________________ 2010-2014: 2000 Mazda 323 Protege 2014 - 2016: 1991 Toyota MR2 SW20 2016 - Err, 2016: 2002 Mazda 323 Astina SP20 2016 - Err, uh, 2016: 1991 Mazda MX5 NA 2016 - 2017: 2000 Alfa 916 Spider 2017 - 2018: 2007 Alfa Brera 2018 - Current: 2018 Mazda 3 SP25

08-04-2013, 09:48 PM	#992
ghetto3 Senior Member Join Date: Sep 2011 Location: north coast nsw Car: 97 ba 1.8 323 Posts: 799	How long until i need to fix up the remaining balance for those 17x8"+35 babies? Have a look at my latest album to see where all my spare cash is going! Well that and court proceedings, solicitors and the like. Vampires they are for sure.. Last edited by ghetto3; 08-04-2013 at 09:52 PM.

08-04-2013, 11:18 PM	#998
HAIGHIE Senior Member Join Date: Jun 2010 Location: wollongong Car: 99, BJ 323 astina hatch Posts: 1,506	Got me some face lift __________________ Cars .. 1: 241kw Turbo 1999 BJ 323 Astina . 2: 1983 ke70 Corolla. 3: 2011 PK Ranger Wildtrak (tow car )

17-04-2013, 07:20 PM	#999
DVS AstinaGT Regular Join Date: Jun 2007 Location: Sydney Car: BJII sp20 Posts: 488 View Photos By: DVS	what bj stuff do you have coming in next few containers? __________________ 2002 Mazda Astina 323 SP20

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AstinaGT Big Brother 2004	KittyKatSmack	General Automotive Talk	7	14-08-2004 10:21 PM
Happy Bday rupeWRECHT!	Dogo	General Automotive Talk	25	07-08-2003 03:11 PM

11-03-2013, 07:04 PM	#983
Rafferty Junior Member Join Date: Jan 2012 Location: Sydney Car: 2001 Mazda Astina 323 Posts: 95	Hi Rupe, Is it hard to find generic wiper blade replacements for these? I read in the GB for these Wipers where TheMAN said they take 9mm ones. And that normally you can only get 6, 7, and 8mm ones generically. Do you really have to order them through Honda to get individual ones from different car models to make p a new set? I really want to get these, they look excellent but I don't want it to be a hassle later on when its time to replace blades. Have you had any feedback from al the guys that bought in the group buy early last year or is it too early and no ones replaced theirs yet? Also, what about what Ed suggests at the end of wiper GB thread to maybe get a GB for the replacement blades available from Japan..? Anyway, let me know and I'll decide wether to go ahead. Thanks for your help, Raff

12-03-2013, 05:07 PM	#986
Rafferty Junior Member Join Date: Jan 2012 Location: Sydney Car: 2001 Mazda Astina 323 Posts: 95	Ok Rupe, hit me up for a set of those wipers buddy. For BJ 2001. Send me payment details via PM. Thanks

08-04-2013, 09:40 PM	#991
Noble323 E74A Join Date: Nov 2004 Location: Sydney Car: SP20 Posts: 1,248	cool hopefully my stuff is on this

08-04-2013, 09:56 PM	#995
ghetto3 Senior Member Join Date: Sep 2011 Location: north coast nsw Car: 97 ba 1.8 323 Posts: 799	Another installment tomorrow then!! Megasquirt will have to wait.