02-KQ-LASR - Meet your competition

project.r.racing · 22-02-2009, 09:42 PM

296kW dyno proven.

Althougn this smooth kit does not match the squarer lines of the Laser.

Ryan

chicaboo · 22-02-2009, 09:45 PM

I think the lines flow just nicely. I'd like an SR2 that looked like that.

Without VICS issues, flywheel wobbles, and water leaks...
Gav.

marcs_sp20 · 22-02-2009, 09:54 PM

And to think I only saw this on Xmas Eve last year and it was still Silver!

Last time I saw it, I thought it was producing 296HP at the wheels...

Did Ben end up getting more pics of this thing? (saw the thread on QC.net

)

Rhys_Mazda323 · 22-02-2009, 10:33 PM

that car is awesome

Mc_Nuggets · 23-02-2009, 09:30 AM

Quote:

Originally Posted by chicaboo

I think the lines flow just nicely. I'd like an SR2 that looked like that.

Without VICS issues, flywheel wobbles, and water leaks...
Gav.

wow i never new that

RedLineResident · 23-02-2009, 12:30 PM

Torque steer much... ?

That is pretty wild tho.

bourbon · 23-02-2009, 12:58 PM

i dont like it... prefer 02-kq-lasrs one

Ice88 · 23-02-2009, 01:41 PM

I dont like the front bar. Too wank factor for me, nice power out put though

marcs_sp20 · 23-02-2009, 01:52 PM

I'll upload some pics from jamboree from like 06 to show ya's a comparison, its quite litterally gone bezerk!

And it looks like HFM in Toowoomba is responsible for all the new work too!

02-KQ-LASR · 23-02-2009, 06:08 PM

Quote:

Originally Posted by bourbon

i dont like it... prefer 02-kq-lasrs one

i feel so proud!!!

it is a nice car though. engine is tough as. if i had the $$$ id be tempted to go all out, but at the moment its not really worth it....
mine looks stock compared to that! lol

70NYD · 23-02-2009, 07:29 PM

yuck i hate the front bar

veilside kits are so ugli at the front on some cars
i agree with bourbon here

bourbon · 23-02-2009, 08:11 PM

seriously kq yours doesnt look stock...its the subtle changes that make it look so good...

89sp1.8 · 23-02-2009, 08:39 PM

meh..the only thing about that car that impresses me is the power output...but thats just me

02-KQ-LASR · 23-02-2009, 09:01 PM

with that laser the thing id do, is either get bigger rims, or lower it about another inch and a bit. even with 18s they look real small in the guards.

if i do end up going all out, id go for 19's and coilovers.... or maybe a smaller front lip and coilvers wound down lower. so mthe rims fill it out a lot better.

Rupewrecht · 23-02-2009, 09:03 PM

Reminds me of an EvoIII from the front. Any better pics?

Impressive power output...but it must be laggy! - and use a gearbox for each dyno run lol

02-KQ-LASR · 23-02-2009, 09:10 PM

i had two pics of it from a few years ago when it was silver and looking pretty ricey. (it was covered in stickers)

marcs_sp20 · 23-02-2009, 10:18 PM

Like this?

This was taken at the Fast Fours Jamboree 2006... I'll try and find some more pics...

02-KQ-LASR · 23-02-2009, 10:21 PM

i gotta say it looks 200x better in the blue!

Rhys_Mazda323 · 23-02-2009, 11:46 PM

the way it looked before suggested 'try hard'

the new look is 1000 times better lol

bourbon · 24-02-2009, 08:40 AM

the blue looks better but still its but ugly

22-02-2009, 09:42 PM	#1
project.r.racing Senior Member Join Date: Sep 2004 Location: n/a Car: n/a Posts: 10,929	02-KQ-LASR - Meet your competition 296kW dyno proven. Althougn this smooth kit does not match the squarer lines of the Laser. Ryan

22-02-2009, 09:54 PM	#3
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	And to think I only saw this on Xmas Eve last year and it was still Silver! Last time I saw it, I thought it was producing 296HP at the wheels... Did Ben end up getting more pics of this thing? (saw the thread on QC.net ) __________________

22-02-2009, 10:33 PM	#4
Rhys_Mazda323 Junior Member Join Date: Oct 2008 Location: Helena Valley, Perth Car: 2002 323 Protege Limited Edition Posts: 147	that car is awesome __________________

23-02-2009, 12:30 PM	#6
RedLineResident Senior Member Join Date: Oct 2006 Location: Adelaide Car: BA V6 Hardtop 5 Speed & 97 Prelude VTIR Posts: 1,518 View Photos By: RedLineResident	Torque steer much... ? That is pretty wild tho. __________________ "Amateurs practice until they get it right." "Professionals practice until they can't get it wrong."

23-02-2009, 12:58 PM	#7
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	i dont like it... prefer 02-kq-lasrs one __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

22-02-2009, 09:45 PM	#2
chicaboo Senior Member Join Date: Sep 2004 Location: Logan prefecture Car: Touge monster Posts: 7,585	I think the lines flow just nicely. I'd like an SR2 that looked like that. Without VICS issues, flywheel wobbles, and water leaks... Gav.

23-02-2009, 01:41 PM	#8
Ice88 Senior Member Join Date: Jun 2008 Location: Auchenflower, Brisbane Car: Blue SP20 Posts: 2,782	I dont like the front bar. Too wank factor for me, nice power out put though

23-02-2009, 01:52 PM	#9
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	I'll upload some pics from jamboree from like 06 to show ya's a comparison, its quite litterally gone bezerk! And it looks like HFM in Toowoomba is responsible for all the new work too! __________________

23-02-2009, 07:29 PM	#11
70NYD Veni, vidi, vici Join Date: Mar 2008 Location: Brisbane Car: 1996 BA Hatch & 2005 RX8 Posts: 4,911 View Photos By: 70NYD	yuck i hate the front bar veilside kits are so ugli at the front on some cars i agree with bourbon here __________________

23-02-2009, 08:11 PM	#12
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	seriously kq yours doesnt look stock...its the subtle changes that make it look so good... __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735

23-02-2009, 08:39 PM	#13
89sp1.8 Senior Member Join Date: May 2005 Location: brisbane Car: bg astina Posts: 1,186	meh..the only thing about that car that impresses me is the power output...but thats just me

23-02-2009, 09:01 PM	#14
02-KQ-LASR SHO~247 Join Date: Sep 2006 Location: SA Car: laser kq 2002 Posts: 2,024 View Photos By: 02-KQ-LASR	with that laser the thing id do, is either get bigger rims, or lower it about another inch and a bit. even with 18s they look real small in the guards. if i do end up going all out, id go for 19's and coilovers.... or maybe a smaller front lip and coilvers wound down lower. so mthe rims fill it out a lot better. __________________ lots of bj/kn/kq laser parts for sale!! custom boot install(fibreglass boxes),mazda 3 handbrake rachet,power window motors x 2,power window switches, guage rings its all gotta go!!! pm me any offers!!

23-02-2009, 09:03 PM	#15
Rupewrecht Administrator Join Date: Mar 2002 Location: melb.vic.au Car: AZ-1, Astina Hardtop Turbo, BJ Protege, Beetle Posts: 16,525 View Photos By: Rupewrecht	Reminds me of an EvoIII from the front. Any better pics? Impressive power output...but it must be laggy! - and use a gearbox for each dyno run lol __________________ jdmparts.rupewrecht.com Sourcing your not-quite-overnight parts from Japan WRECHT--\|--SLOWTEGE--\|--BEETLE--\|--SUBSTITUTE--\|--AZ-1

23-02-2009, 09:10 PM	#16
02-KQ-LASR SHO~247 Join Date: Sep 2006 Location: SA Car: laser kq 2002 Posts: 2,024 View Photos By: 02-KQ-LASR	i had two pics of it from a few years ago when it was silver and looking pretty ricey. (it was covered in stickers) __________________ lots of bj/kn/kq laser parts for sale!! custom boot install(fibreglass boxes),mazda 3 handbrake rachet,power window motors x 2,power window switches, guage rings its all gotta go!!! pm me any offers!!

23-02-2009, 10:18 PM	#17
marcs_sp20 Moderator Join Date: Oct 2005 Location: Ipswich, Queensland Car: 2002 Mazda Astina SP20 2006 Mazda 6 GY Wagon Posts: 9,769 View Photos By: marcs_sp20	Like this? This was taken at the Fast Fours Jamboree 2006... I'll try and find some more pics... __________________

23-02-2009, 10:21 PM	#18
02-KQ-LASR SHO~247 Join Date: Sep 2006 Location: SA Car: laser kq 2002 Posts: 2,024 View Photos By: 02-KQ-LASR	i gotta say it looks 200x better in the blue! __________________ lots of bj/kn/kq laser parts for sale!! custom boot install(fibreglass boxes),mazda 3 handbrake rachet,power window motors x 2,power window switches, guage rings its all gotta go!!! pm me any offers!!

23-02-2009, 11:46 PM	#19
Rhys_Mazda323 Junior Member Join Date: Oct 2008 Location: Helena Valley, Perth Car: 2002 323 Protege Limited Edition Posts: 147	the way it looked before suggested 'try hard' the new look is 1000 times better lol __________________

24-02-2009, 08:40 AM	#20
bourbon The Hairy Mod Join Date: Sep 2005 Location: southside ya'll and North Side, Brissy Car: MINI Cooper S 2003 Posts: 8,110	the blue looks better but still its but ugly __________________ For All your crash repair panels & lights, clear lights contact us at PANEL HOUSE 45 RANDALL ST SLACKS CREEK QLD 4127 PHONE : 07 3808 8737 FAX : 07 3808 8735